Folding Phone Stand - Hangable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix'd to add a second swivel stand and then open both up to make this also hangable.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Wanted something to hang over my car's radio to watch stuff while parked. I printed the original model in TPU-95 to avoid scratching my screen. I modded the stand part to be wider and open but noticed also that the model had no bottom supports.
Remixed this model to include a brace to keep the swingable base from extending more than 90 degrees and then duplicated and relocated the hanger part so it could hold the brace in better. Yes, i did a lot of this work with TinkerCad
In addition to printed parts (6 total) this also needs 3 lengths of PLA to use as pins.
The Full model can be printed to include all the parts. I used this file, sliced with Cura 5.3 Alpha
- Draft 0.20
- 3 walls
- 228 temp
- 65 bed
- Top Bottom Pattern - Zig Zag
- 20% infill Zig Zag