VTech 5" Baby Video Monitor Case (RM5764HD, RM5764-2HD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case to protect the parent unit from falls.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 1923
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This specific VTech baby monitor is one of my favorites due to it supported both direct wireless as well as Wi-Fi connectivity between the cameras and the parent unit (with app viewing via Wi-Fi), but I found the parent unit to be very fragile with one of them breaking after a small drop to the ground. I've tested it specifically with the RM5764HD and RM5764-2HD model numbers, but I suspect it will fit fine with other models that have a similar looking parent unit.
This case fits around the parent unit to provide some protection against falls. The antenna, stand, power button and USB-C ports are still accessible. I opted to cover the activity lights on the corner, though with translucent materials you should still be able to see them.
The dimensions of the model will require a filament with some flexibility. I used TPU for mine. You might be able to generate your own model that works with PLA by downloading the scad file and reducing the front overhang (front_lip_overhang) and giving a bit more space for the case (d_width, d_height).
I couldn't get the support material to come off completely clean when using TPU so I printed the case with the front against the bed so any ugliness due to the supports would be hidden behind the parent unit when inserted.