LowRider 3 CNC - three remixes of Rail Blocks (18.1 mm, 23.4 mm, and 25.4 mm) for Unistrut or 1-½" Aluminum Square Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These remixes are primarily for 1-½" Aluminum Square Tube, but could also be used for Unistrut. These are my third remix
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 909
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Note: There is an updated listing with a newer version of this remix: https://www.printables.com/model/415298-lowrider-3-cnc-three-remixes-of-rail-blocks-181-mm
Also note: Several of my designs for my CNC plasma rig are available here for free.
I had previously created a couple of different remixes of the LowRider v3 rail blocks (Y rail mounts), one for my unistrut-based LR3 for a router (#1 — 23.4 mm), and another one for my 1-½" aluminum square tube-based LR3 for plasma (#2 — 18.1 mm).
These are my third remix of the rail blocks. The only difference between v2 and v3 remixes (of the 18.1 mm block) is that the v3 has a screw slot instead of a screw hole, so it offers some adjustability. I kept that feature in the 23.4 mm and 25.4 mm options of the “third remix.”
These all have a narrower footprint than the original rail blocks, for fitting onto either unistrut or 1-½" Aluminum Square Tube.
I used the third-phase remix for the 1-½" aluminum square tube of my LowRider v3-based plasma rig. However, as mentioned, these rail bocks could also be used for Unistrut-based LowRider 3's.
Related parts:
- Remixed Rail Block #1 was used in conjunction with this set of extensions for use with metal strut (aka unistrut): https://www.printables.com/model/220187-lowrider-3-cnc-table-extenders-to-use-lr2-table-wi
- Remixed Rail Block #2/#3 was used in conjunction with this end cap for the 1-½" Aluminum Square Tube: https://www.printables.com/model/257455-end-cap-for-15-square-tube-18-wall-v10
- Remixed Rail Block #2/#3 was also used in conjunction with this end cap for the ½" EMT conduit: https://www.printables.com/model/257450-end-cap-for-12-emt-tube-v10
Tubing sizes…
- “rail-block-REMIX-3-18p1.stl” is for 18.1 mm OD tubing
- “rail-block-REMIX-3-23p4.stl” is for 23.4 mm OD tubing
- “rail-block-REMIX-3-25p4.stl” is for 25.4 mm OD tubing
Print info:
- Print as oriented
- Print without supports
- You will want these printed strong. I printed with 0.6 mm nozzle, with 4x4x4 (4 walls on both top, bottom, and perimeter walls) and 70% infill. The same settings could work for 0.4 nozzle. As soon you start tightening screws into them you will be glad you made them strong.
If you have any questions, I'm on the V1E forum as Doug Joseph (design8studio) or you can ask here via the comments.
My PayPal tip jar: https://paypal.me/design8studio
Various LowRider 3 CNC remixes:
View all my models and remixes on Printables:
*Amazon product links are affiliate links.