Tulip - Remade Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original tulip's base was way too large to be able to insert a flower core into.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 807
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
The original tulip's base was way too large to be able to insert a flower core into. I modified it within Fusion 360 to be able to use said cores. At first I had scaled down the whole tulip, but that resulted in the tulip's pedals to be only a single extrusion wide. This way the size of the body stays the same, but nothing else had to be changed. I didn't add in the twisting lock function like the lily has because the fitting is so good you have to apply a bit of slight pressure to get it to go in, and it's enough to firmly hold in place.
Print instructions
Don't use "Detect thin walls," it makes the print look like garbage!