1 / 2
Sweet dreams are made of teas
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rotating teabag organizer with four compartments and a changeable cover, made to fit bags up to 80x70 mm
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (18)Powiązane
There is a plain cover model if you want to customize it!
Printing suggestions:
Teabag organizer body
This worked pretty well for me:
(sliced with cura and printed with black 3DJake PLA, 8h49m print time)
- 0% infill
- 0.4 mm nozzle
- no support
- no adhesion
- 0.28 mm layer height
- just the 1st layer printed slower (25 mm/s for me)
- 50 mm/s for the rest of the print (maybe you can try to go faster there, you know your printer better than i do
Teabag organizer cover and base
printed as the base but
- 0.2 mm layer height
- 10% lightning
- 2 full layer top/bottom
the font i used is Midnight Constellations by Shara Weber
