Cat Scratcher Wall Corner Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount cat scratcher I designed to install to a wall corner.
- Ocena
- 5 / 5
- Polubienia
- 298
- Pobrania
- 713
- Wydruki
- 6
- Wyświetlenia
- 5499
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
Install this to a wall corner with 3 #10 construction or sheetmetal screws (into the metal reinforced corner on most walls) This will be a 3.5mm construction screw or sometimes colloquially called “spax” in Europe. The main outer shell of the model can be printed in vase mode but only if you use a large nozzle or a wide line width and slower speed. I am using a 1mm nozzle for my vase mode print. I have a work in progress vase mode optimized version for smaller nozzles in the works but it is not finished yet. Pretty much any material is suitable here I designed it to be a gentle enough profile for the cat that PLA won't be an issue. PETG, ABS, Nylon, or a stiff 95A TPU would also be great!