Brother P-Touch P700 - Catch Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Catch tray for the Brother P-Touch P700 label printer (three different tray sizes)
- Ocena
- 4,889 / 5
- Polubienia
- 39
- Pobrania
- 247
- Wydruki
- 8
- Wyświetlenia
- 2207
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A stand and catch tray for the P700 label printer.
Three sizes of the catch tray are available as STL (40/50/60/70/80 mm depth). The F360 file is also available in the files section to create other sizes or modify it further.
I also made a nice case for TZe tape cartridges.
Support my work
For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).
If you want to support my work directly, you can buy me a coffee.
If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |
Also check out my other models.
Updates
26.11.2023:
- Add 70 & 80 mm version as STL downlaod