Yosemite Sam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yosemite Sam from Looney Tunes
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 211
- Wydruki
- 3
- Wyświetlenia
- 980
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Yosemite Sam
Cartoon character from Looney Tunes
Single extruder multi-color print.
- First Layer: White (eyes)
- Second layer: Yellow (scarf and buckle)
- Third layer: Red (shirt)
- Fourth layer: Orange (hair)
- Fifth layer: green (gun color)
- Sixth layer: Blue (pants under chaps)
- Seventh layer: Tan (skin)
- Eighth layer: Brown (layered with 3 shades for hat > belt > chaps)
- Ninth layer: Black (outline)
Sam was a little tricky because there are so many colors in his design, and multiple shades of brown. I only have one brown and a tan, but found my brown can layer nicely for a few different shades. So, the skin is the tan, then the hat is a single .2mm layer of brown for the lighter shade, followed by a second and third layer for the belt and chaps which are slightly different shades. If you have a lighter brown in addition (for the hat), you can add another color change between the Tan and Brown at 3.6 or 3.8 for the belt and chaps.