Black & Decker 7604 Router Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Old Black & Decker 7604-04 Router fell off the work bench and cracked the original base plate into many small bits.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
My Old Black & Decker 7604-04 Router fell off the work bench and cracked the original base plate into many small bits. I finally got around to making a new one but I didn't have the original to use as a reference because I had thrown it out long ago.
This one should work fine for basic use. I may modify it later to have an attachable vacuum connector, LED or fence as needed.
Print Settings
Printer:
Two Trees Sapphire Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
25%
Filament:
Generic PLA PLA
Notes:
There are 4 small countersunk screw holes on the bottom that could require support. I forgot to add them but it still printed with no issues. A Brim may be required depending on your bed and material used. I had nothing, but PLA tends to stick well to my print surface.
I will probably reprint this later with PETG if I decide on a final version as it is a power tool and PLA is a bit weak for 30,000 RPM.Category: Parts