Sapphire Pro Hotend Stabilizer with BL Touch & Tension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The new version of this hot end support allows a belt tightening system like the ones shown in the image and links…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The new version of this hot end support allows a belt tightening system like the ones shown in the image and links below.
https://www.thingiverse.com/thing:4246413 https://www.thingiverse.com/thing:4552756
It also has an added gusset for strength as the old one was prone to breaking. I use a z-offset of about -1.3 to -1.4. This will vary depending on your hotend. It will require a 3 x 8 mm button head screw to secure to the carriage bracket.
Hotend support with BL Touch mount for the Two Trees Sapphire Pro. With this mount it holds the hot end very firm with the carriage. This could help stabilize the hot end during rapid direction changes. The design was based on an early version of one made by Roland Med. I did also add a fillet to the opening to the fan and a mount for a BL Touch/3d Touch.
Print Settings
Printer:
Two Trees Sapphire Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15
Category: 3D Printer Parts