Honeycomb Storage Wall Parts 0.6mm Nozzle Easy Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original wall attachment parts and a few of the part holders to be easier to print with .6 nozzles.
- Ocena
- 4,833 / 5
- Polubienia
- 249
- Pobrania
- 1455
- Wydruki
- 10
- Wyświetlenia
- 5622
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of ‘RostaP’ Honeycomb storage wall parts. I only remixed the wall attachment pieces and a few of the part holders to be easier to print with .6 nozzles.
With the original, I was having issues with sagging overhangs on the side and on the face.
The main changes are:
- Removed the groove between the multi-hex faces so that when printed face down they have a better finish.
- Removed the slot on the vertical faces to improve print quality when using larger nozzles. From my testing this still provides enough flex, but I recommend printing a test part with your filament before many.
I have been printing these with the '0.30mm SPEED' built in profile in PrusaSlicer with great results. The print time is pretty fast and the overall finished part quality has fewer defects as a result of the larger print volume/layer height.