KOBRA Bike Light Detachable Handle Bar Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got this bike light off amazon some years ago.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 441
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Got this bike light off amazon some years ago. Really liked the light but the handle bar mount was garbage so I made this thing.
To use this, you will need to remove the stock mount it comes with. You may wish to put some hot glue, silicone glue, epoxy, etc. to fill the space around the wire for the light to retain its water proof qualities. I've biked in the rain enough times to know that not filling the hole isn't a problem if it faces downward.
I've never had the light fall off although I wish I made the locking notches just a little deeper. I just use a hose clamp to attach the top part to my handle bar.
Print instructions
Category: Sport & Outdoors Summary
Got this bike light off amazon some years ago. Really liked the light but the handle bar mount was garbage so I made this thing.
To use this, you will need to remove the stock mount it comes with. You may wish to put some hot glue, silicone glue, epoxy, etc. to fill the space around the wire for the light to retain its water proof qualities. I've biked in the rain enough times to know that not filling the hole isn't a problem if it faces downward.
I've never had the light fall off although I wish I made the locking notches just a little deeper. I just use a hose clamp to attach the top part to my handle bar.
Print Settings
Printer: Folgertech 2020 I3
Supports: Yes
Resolution: .2
Notes:
It prints just fine how things are currently orented. If your Z axis isn't calibrated you'll know it when trying to assemble.