3030 Duet Wifi Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact case for mounting a Duet Wifi v1.04 to 3030 extrusions.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact case for mounting a Duet Wifi v1.04 to 3030 extrusions.
Case can be mounted flush as seen in the photos or on top of an extrusion.
Designed for use on a Hypercube Evolution or any 3030 profile.
Lid is snap fit.
Integrated tab for reset button.
- Base: print as is.
- Lid: print flat.
- Fan duct: print with openings facing upward with supports only on the screw tabs, if desired.
Print instructions
Category: 3D Printer Accessories Summary
A compact case for mounting a Duet Wifi v1.04 to 3030 extrusions.
Case can be mounted flush as seen in the photos or on top of an extrusion.
Designed for use on a Hypercube Evolution or any 3030 profile.
Lid is snap fit.
Integrated tab for reset button.
- Base: print as is.
- Lid: print flat.
Fan duct: print with openings facing upward with supports only on the screw tabs, if desired.
Parts
50x50mm blower style fan, mouth opening 16x20mm.
- 4x m4 screws 5-15mm for mounting the Duet Wifi.
- 2x m3x25mm screws for mounting the fan.
- 2x m3x5mm screws for mounting the fan duct.
- 2-4x m5x10mm screws for mounting the case to 3030
2-4x m5 hammer nuts for mounting the case to 3030
Change Log
Update 3-12-18
Included a version of the fan duct that has a bit longer of a lip.
- Update 4-12-18
Fixed short fan duct height.