Gridfinity LTT Screwdriver holder with bit storage.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rebuilt version of the Gridfinity LTT driver holder from "Kieran E" with a more accurate negative space for the driver
- Ocena
- 4,864 / 5
- Polubienia
- 84
- Pobrania
- 734
- Wydruki
- 24
- Wyświetlenia
- 2888
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A remixed version of the Gridfinity LTT driver holder from "Kieran E" with a more accurate negative space for the driver and some adjustments made to the placement of the storage to allow for an additional 3 easily grabbable bits for commonly used or favourite bits.
The negative space is from the LTT screwdriver case made by MelSK :
https://www.printables.com/model/372998-ltt-screwdriver-case
Included are versions with all bit storage options / some / none.
This uses the original 1x12 bit storage blocks from the original design. Although I have also included a blank 1x12 bit holder modified with a slightly more robust bottom “stop” to prevent the bit from being inserted too far and tighter tolerances for a better fit when printing with TPU it is also slightly larger for a better fit into the slots on the base.