Sovol SV06 Top Z bearings (fixed dimensions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A top Z plates mod for the SOVOL SV-06 to add 608ZZ bearings. Can be used with or without bearings. Please read bellow..
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 326
- Wydruki
- 7
- Wyświetlenia
- 1595
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I moved the holes for the linear rods 0.5mm closer to the z screws to make the dimensions correct since the original creator didn't have the sovol CAD files at the time.
Description copied from original model:
Made from scratch, just few additions to the original to make it easier to print with ASA, ABS… and with bearing of course. Added clearence for the rod hole to prevent pushing down your motor mount when tightened
2 models :
- Standard (Vers1)
- With holes (to allow Z lead screw disassembly without removing the top plates) (Vers2)
Print settings :
- 0.2 layer height
- Layer width .45 for .4 nozzle and 4 perimeters
- Layer width .65 for .6 nozzle and 3 perimeters
- 6 top / 5 bottom layers min
- Infill 20% min (gyroid, honeycomb)
Before using this part, you have to perfectly square your printer to ensure proper rotation of the Z lead screws or you will have Z wobble artefacts on your prints :
- Z frame axis square with bottom frame
- Z motors mounts square with Z frame (stock it wasn't in my case)
- Z frame L&R, Z lead screws L&R, Z rods L&R are parallel