Fibonacci Spiral Clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clock frame designed to work with any 55x55 clockwork (easily found in your favorite electronics shop).
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 3847
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
A clock frame designed to work with any 55x55 clockwork (easily found in your favorite electronics shop). The design is made so it will be printable with both a single material printer and an MMU printer.
The pattern used is based on Fibonacci's sequence
Print instructions
You can either print the gcodes:
Print the black first, when it finishes, leave it on the heatbed. Then start the white print, which will print over it so the two get merged.
Or you can use the STL files. Here you will have to load the STL in Slic3r PE and split it. Do this by double-clicking the model to go to the model settings. There click split and remove all parts that should be white so you are left with only the black parts. Make sure not to move the parts! After saving, do the same for the white parts.
More information about this technique can be found here: https://www.youtube.com/watch?v=KV2AjyowXX4