1 / 2
Purim Hamentashen Gragger Headband
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sweeten up your Purim costume by sporting a Hamentashen headband that doubles as a gragger
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Instructions
- The bottom and top should probably be printed in the same color
- The top will need to be printed with supports
- Pick your favorite filling color (I used Printed Solid's Jessie Red Ice since it looks just like strawberry jelly)
- Print 5-10 “Dots” to go inside (or use beans, rice, etc)
Assembly Instructions
- Remove supports from top
- Glue top and bottom together (I used CA glue along the edges as well as a little on the triangular supports)
- Insert Dots, beans, rice or whatever you want to make noise
- Glue filling into the slot
Be careful with the filling - you may only get one chance, since you can't get it back out once you start pushing it in. And you will need to carefully push it along the corners until it is fully seated, since it is so tight.
Usage
- Print one headband from the Spinning Dreidel Headband model
- Once the hamentashen is screwed into the headband, it can be spun or you can shake your head around to make noise
- For extra awesomeness and noise, unscrew the hamentashen and shake vigorously