Skadis Timemore Chestnut C3 Pro Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis Holder for the Coffee Handgrinder Timemore C3 Pro
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 619
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this Skadis Holder for my Timemore Chestnut C3 Pro coffee handgrinder based on the Skadis Secure Clip System from mkingery.
The Handgrinder fits really good in this holder (not to tight but not too loose as well). For mounting it to the Ikea Skadis Board two of the Secure Clips are necessary as well.
BTW: it uses two slots in the Skadis board and blocks one between it.
I printed it in White R-PLA from 3DJake in about 6 hours with a raft and small supports under the mount (because I had one failed print where the mounts became loose from the print bed).
In case you want to try to use this holder with other objects or grinders: The inner diameter is 53mm wide and the whole model is 67,5mm high.