GoPro HERO10 Bones ZD550 Quadcopter Mount

UPDATE: The v2 model is a little chunkier with additional gusseting at the front to reduce flex. I also included the Fusion 360 archive, which is admittedly a bit messy. I was working quickly rather than methodically, which is likely evident in the resulting part history.

I used Fusion 360's generative design feature to help design this mount that puts the props and skids just out of the field of view while keeping the mount very lightweight but sturdy. It should print without support in the as-saved orientation, though I used a small support underneath the front-most portion.

I ended up turning the camera upside down to fully remove the prop tips from the FOV, but that's really no big deal, since video orientation is automatic. I also drilled a couple of 0.100" holes through the thin webbing for some zip ties, which should have minimal impact on part strength.

My previous design achieved the same goal of keeping a clean field of view, but tying the skids together that way set up some strange and surprisingly violent oscillations. This replacement is lighter and causes no additional frame resonance that I can detect.

Recommend PETG, ASA, or nylon for durability. I used 3 perimeters and 18% infill.