Filament Winder Remixed to a 26mm shaft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Spool Winder by Les Kaye, remixed to work with my 26mm ID spool bearings
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 187
- Wydruki
- 0
- Wyświetlenia
- 1899
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I have standardized my spool holder accessories and bearings on a 26mm diameter shaft. Those bearings and other spool holders are collected here: https://www.printables.com/model/128653-spool-reel-holder-system-with-adaptors-bearings-fo
When I needed a winder to respool some filament, the model by Les Kaye was ideal in every other respect, but it uses a 16mm shaft. I modified the shaft and retention nut, to 26mm. I also modified the frame, to hold the modified nut.
The models here include test pieces, which allow you to verify the tolerances in your system, before printing the final parts.