1 / 2
Electric fence insulator - 5 inch, nail on
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strong and simple electric fence insulator.
- Ocena
- 3 / 5
- Polubienia
- 32
- Pobrania
- 168
- Wydruki
- 2
- Wyświetlenia
- 987
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (60)Powiązane
I needed insulators for my chicken fence, but didn't want to buy a whole bag. Instead, I designed these. Using inexpensive filament, they ended up being cheaper than a purchased one!
I used the settings below. There's a small strip to remove after printing.
Recommended settings using .4mm nozzle:
- 0 bottom layers
- 5.5% Cubic Infill
- 3 perimeters
- .6mm extrusion width
- .3mm layer height
I hope this helps you. Enjoy!