Throwing Glider Swan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small throwing glider with size 135x90x20 mm printed from one piece without supports.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 185
- Wydruki
- 1
- Wyświetlenia
- 787
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Glider SWAN
Small throwing glider with size 135x90x20 mm printed from one piece without supports. The wing is made of only one layer, so you need to set the layer height to 0.10 mm. At the same time, it is good to set the fill to 100% for better performance. The glider is light on the front part, so it is enlarged. There is also a version in the files without enlarging the front part, you can experiment and add maybe plasticine to the nose and see how you get the best performance. :)
The V2 and V3 versions have more or less similar performances.
Print settings
Layer hight: 0,1 mm
Infill: 100%
Material: PLA
Print time: ~ 45 minutes