1 / 2
Nozzle cap for sealant cartridge (metal or plastic thread) - Parkside (lidl) o-ring
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find caps for my o-rings (ID: 20mm, OD: 27.1mm, diam: 3.55mm). I found them in a lidl parkside o-ring kit.
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 407
- Wydruki
- 6
- Wyświetlenia
- 1380
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 9)Remiksy (0)Kolekcje (120)Powiązane
Useful to keep opened cartridges (silicon, construction adhesive..).
You'll need an o-ring (inner diameter: 20mm, diameter 3.55mm) to ensure a tight fit. I found mine in a parkside o-rings box.
I printed my caps in PETG (0.2 layer height) with the hole facing upward.
The file “Cap Plastic Euro thread.stl” is for standard plastic sealant cartridges, and the file “Cap metal M15x1.5 thread.stl” is for SIKA metal cartridges.