Bathroom Stall Blocker and Sign Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a door blocker and a sign holder that was designed to put bathroom stalls out of order for maintenance.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
Hi all,
This is a bathroom stall door blocker and sign holder that was designed to close off a stall for maintenance.
The printed models that can be seen in the photo were printed on a Ultimaker S3 with a .2mm layer height, standard settings with supports. I suggest increasing layer height to .3mm if you need to print a bunch. Print quality remains pretty similar at the increased layer height. So far I have printed 2 sets of these on a .2mm and 4 on .3mm with no failed prints.
I have also included the .step files and the .fcstd FreeCAD files incase anyone wants to make edits to the design, I am happy to make changes if needed to the OG files or provide more information if needed.
Thank you,
Fletcher