1 / 5
Icosahedron Lamp — zdjęcie 1
1 / 5

Icosahedron Lamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This lamp requires a very little amount of plastic to make. The only part you print are the corner adapters.

Ocena
0 / 5
Polubienia
42
Pobrania
97
Wydruki
0
Wyświetlenia
1467
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This lamp requires a very little amount of plastic to make. The only part you print are the corner adapters. In return, you need chicken skewers or some small sticks and a transparent garbage bag. I used chicken skewers as the sticks, and a transparent garbage bag to pull over the “skeleton”. To shrink the bag I used a heat gun to gently warm up the bag.

Here is a link to the Onshape document if you want to change the hole diameter: https://cad.onshape.com/documents/181555d3bcee2746dd595981/w/0e28c9e528aad03504373a5b/e/3f8b833d2b0ccee512fe32cb

Tagi