Mini Elevator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a small elevator I created for miniatures, dioramas, etc.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 1916
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to crate a diorama of a scene from a book I had read, which largely involved an elevator. assembly for this is simple, just attach the bottom section (the one with springs) to one end of one of the boards (you can use hot glue for this) and the top section (the one with a bar) to the other end of that same board, being CAREFUL to approximately line up the small pins/bars and to not snap them, as they help more firmly secure the top/bottom when glued. then simply attach the ceiling to the cabin, and glue/place into the shaft.