Kobra Go X Axis Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tensioner for the X axis of the Anycubic Kobra Go
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 310
- Wydruki
- 6
- Wyświetlenia
- 1175
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted rid of the wobbly plastic pulley and the blue plastic.
This holds the new aluminum pulley wheel snugly. Original designer did a great job, all I had to do was change the attachment to the backside and to fit the Kobra Go. The bolt threading is a bit tight so use a bit of soap or something plastic safe to get it worked in.
Needs a little persuasion to install but holds tight.
Bolt fits a 3mm pulley which is same axle size as original but won't fit the original wide crappy pulley. If you want a different size bolt please go to original design page.
I included all 3 Nuts so you can choose your favourite design
Need:
X1 - M3_16mm bolt
X1 - of the original M3 bolts to hold it on
X1 - 20 teeth, bore 3mm width 6mm Pulley
Printing:
Print everything vertical with plenty of Brim to keep it stuck to the bed and only the Base should need supports (build plate only)