Wireless Charging Stand for Phones (With f3d for easy customization)

Wireless Charging Stand for Phones (With f3d for easy customization)

The model is available for free download and use.

If you still want to invite me for a coffee for my effort, troubles and time, you can do it via:

https://www.paypal.com/paypalme/avicode

Charger PCB:

https://www.amazon.com/Gikfun-Wireless-Charger-Circuit-Charging/dp/B073W7P5T8?crid=1QY9W03ZDNUMW&keywords=wireless+charger+pcb&qid=1655117841&sprefix=wireless+charger+%2Caps%2C1864&sr=8-3&linkCode=ll1&tag=voiyt-20&linkId=5ab68eccc8a7a4ec082f70b8b559594e&language=en_US&ref_=as_li_ss_tl

Features:

• Robust design
• Strong & stable base
• Has lasted for over 2 years
• Very efficient and reliable charging stand
• Base is designed to insert 5.8mm Hex Allen keys as weights
  • With the lower L of the Allen keys cut off with angle grinder
  • You can edit the F3D to insert something else available to you
  • I just had a LOT of spare Allen Keys since they come with all the furniture. LOL
• Size works for most phones in landscape mode
  • It should be easy to change the dimensions a bit based on your phone style
• Works with iPhones, Samsung Phones and other Androids
• Uses Generic Qi Wireless Charging PCB & Coil Inside the Print
• This is a single coil charger, and so while it is very efficient, it requires proper centering to charge fast.

Why not just buy one from Amazon?

• You can find these super cheap in Amazon
• The PCB here, actually came out of one I bought on Amazon
• But the Amazon product broke within days, and this has lasted for over 2 years now

Maker Notes:

• Recommend printing the main charger STL first, and then adjust the groove in the base, based on the final thickness of the main print (As the thickness differs due to the "sqish").
• Please print the base flat on it's side for best results. No supports required.
• Electronics go inside the "Coil Cover" part
• Insert the entire cover into the main body
• Super glue recommended to put the parts together
• Please check all measurements of your electronics and your phone to ensure everything is a perfect fit
• Best to print each part separately for best results
  • Then you could use different infill settings for each part
• "Main" & the "Peg" parts must have 90% to 100% infill
  • The Peg is optional BTW
    • Only required if you are using it in a car for GPS, to hold the phone in place
• The base works fine with 15% infill
• Currently I didn't screw the charger to the stand because it has a snug fit and can come off, when we want to lay it flat. But screwing it is an option.
• You can coat the base of the stand with some silicone for better grip and stability
• Highly recommend good braided power cable for the device, as that is what breaks most often
• I built this and soldered a proper braided cable directly to the board for best results
• I removed the USB connector, as that breaks too

Thanks!