Canon 18-135 STM lenshood remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of laurent_despeyroux's lenshood, itself a remix but a nice design, much better shading that the…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of laurent_despeyroux's lenshood, itself a remix but a nice design, much better shading that the 'tulip' hood included with the lens. I broke the side away from the mounting ring in getting it off of the build plate, so I reinforced the sides and bottom edge a little, then added rotation stops so the hood aligns perfectly level. Mine was resized down slightly (height/width of the upper/forward edge) to fit the small printing footprint of the Printrbot Simple Metal.
Since I do a fair amount of lightning photography at night, being able to align by feel is useful, and the depth helps protect against the starting rain. I sprayed the interior matte black to help with its intentions for daylight use.
EDIT 06/23: Per request, fixed a couple of minor STL issues and made the sides thicker - that version is ‘Canon18-135LensHoodThikr2.stl’
Print Settings
Printer Brand:
Printrbot
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
NA
Filament: ESun PLA+ Black
Notes:
Like the original, probably best to print the bottom ring alone and test the fit, resizing as needed. A little sanding to the bottom surface can make a smooth fit
Category: Camera