Following Head Bust
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the effect from Disney's Haunted Mansion Ride, this head follows you as you move side to side.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 370
- Wydruki
- 0
- Wyświetlenia
- 2803
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
Inspired by the effect from Disney's Haunted Mansion Ride, this head follows you as you move side to side. It's a cool effect that's pretty easy to pull off.
First, print the face in a white or translucent filament. You need to be able to have some light shine through it.
Second, print the "box" in a dark / back filament. Glue the two together so you're looking at the concave side of the face.
There should be a small gap between the face and the edges of the box — insert a light into the gap. For mine, I'm using an Adafruit CPX with the leds set to bright white.