Milwaukee Inkzall Holder/Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Larger version of the great pencil holder by Pilot Institute LLC, fits the standard size Milwaukee Inkzall markers.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 176
- Wydruki
- 1
- Wyświetlenia
- 746
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Larger version of the great pencil holder by Pilot Institute LLC, fits the standard size Milwaukee Inkzall markers.
Update: Added two additional versions, both designed for the tip of the marker to point down to aid in preventing it from drying out over long periods. Just added some negative volume modifiers to the model which should be easy to adjust to customize the fit if needed.
Standard version - tip up, marker is easy to remove
Tip Down version - tip down, marker is easy to remove
Friction Fit version - tip down, provides a tight fit to allow removing the marker while the cap stays in place for easy one handed use. Just press the marker in until it bottoms out (does require a bit of force) and it should create a very solid connection. I use pliers to remove the cap from the mount when needed.
When moving up to a .6 nozzle I needed a .3 layer height or smaller for the bridging to work without supports. Printed in PETG.