Wireless Charging Stand - Resin Printed - With F3D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The design works well for phones around 153mm height, due to the position of the coil.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wireless Charging Stand - Resin Printed - With F3D
The design works well for phones around 153mm height, due to the position of the coil.
But if your phone is of a different size, it's easy to adjust the height in the F3D.
Printed with Mono Resin Printer with the flat side directly on the bed.
No raft / angle / anything funcky required.
Just added light default supports to the stand.
Charger PCB:
The model is available for free download and use.
If you still want to invite me for a coffee for my effort, troubles and time, you can do it via:
https://www.paypal.com/paypalme/avicode
Thanks!