Tevo Tarantula PRO upgraded X Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've modified the part from Ivango2 to: balance better the load, so all goes on the carriage bolt and not on the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I've modified the part from Ivango2 to:
- balance better the load, so all goes on the carriage bolt and not on the flange
- make it compatible with M8 bolts (metric standards)
To mount it you have to disassemble the lower carriage wheel and reverse the bolt so to create a larger pull area for the bracket.
it's needed a M8 x 35mm lenght screw and a M8 dice.
I suggest to print it flat with supports for the holes (as you can see in the pics) as this way you maximize the strenght of the material.
And finally a suggestion...Don't tension too much the belt! It's a 3d printer, not a guitar! And if you tension too much you stress the motor and the belt itself!
Category: 3D Printer Parts