Unofficial Official Prusa i3 MK3S+ Spool Holder (Not For Printing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on a dimensionally accurate model of the Injection Molded Spool Holder that ships with the MK3S+
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 330
- Wydruki
- 0
- Wyświetlenia
- 1318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Please Read!!
This is not meant to be a printable model. I uploaded the STL just so we can see it in the 3D viewer.
Use the STEP or Fusion 360 File:
This model is meant to be used in the additive design process for making designs that interface with the spool holder, not for reproducing it. I tried my best to make this as dimensionally accurate as possible.
It was a real pain to model given some odd features. For example, the spacing on the “ribs” on the center support seems like they were placed by eyeball 😆, at least on the version that I have.

I don't know if there are multiple versions of the molds used to make these parts. I also did create an issue over on the Prusa3d Github page to see if the original model used to create the molds was available, but it looks like it's not.
Also, I did not model the internal geometry. The part where the arms connect to the center support. I even fused everything together in the STL so as to avoid any confusion.
I don't have the tools to accurately measure those internal features without cutting off pieces of the spool holder, which I prefer not to do. If anyone wants to remix this and add that geometry, it would be awesome!
andy0838 has already done a great job creating the “ends” that are printable, https://www.printables.com/model/31762-prusa-mk3-spool-holder-endpart
It looks like Andy's design diverges from the original just slightly, I'm guessing to make it easier to print, but the internal geometry is there so if someone were to take that model and merge it with this one, it would be a good start.
Again, my goal with this model is not to create something that is printable, but something that is as accurate to the original as I could make it. I'm sure there are some parts that aren't perfect. It's hard to measure a part like this accurately, and I'm not a professional modeler.
Feel free to grab the .fd3 file and open it up on Fusion 360, but please don't judge me for all the unconstrained sketches 😁