Fujifilm X Telescope Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to mount a camera with the Fujifilm X series lens connector to a 1.25" telescope eyepiece.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 1339
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model allows you to attach any camera with a Fujifilm X series lens connector to a 1.25" telescope. The telescope side and camera side are separated for easier printing and attached together by M3x8 screws.
There are three versions of the base plate that attaches to the camera:
- Fuji_X_Heat_Inserts: Holes designed for inserting an M3x4 threaded insert (Recommended)
- Fuji_X_Screw_Cut: Holes designed for an M3x8 screw to cut it's own threads (Least secure)
- Fuji_X_Tapped: Holes designed to be threaded by an M3 tap
!! Be careful not to over tighten if screwing directly into the plastic !!
There are two versions of the tube that mounts in the telescope:
- 1.25_Telescope: Normal telescope mounting tube
- 1.25_Telescope_Slim: Slimmed down version of the telescope mounting tube. I was having trouble getting the camera to focus, and this solved the problem. Moves the camera 6.4mm closer to the telescope.
For this model, you will need:
- 3 M3x8 SHCS
- 3 M3x4 Threaded Inserts (Optional but recommended)
Since the camera connector is separate from the telescope adapter, you could use it as a platform for other 3d printed lens accessories. It uses three screws evenly spaced at 24mm from the center.