Bambu Labs Hotend LED Coloured Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Change the colour of the 'Bambu Lab' on your X1 hotend - access behind two simple screws
- Ocena
- 4,889 / 5
- Polubienia
- 238
- Pobrania
- 541
- Wydruki
- 13
- Wyświetlenia
- 8373
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Fortunately there is just over 10mm of space in front of the LEDs on the hotend, more than enough space to slide in something to add a bit of colour.
Printed with settings leaning towards this, though not as critical to get it all the way to glass-like.
You might have to change the thickness of the plate depending on what transparent filament you use, but just keep the tabs at 11.18mm to hold it in place.
Update: 04/23 Added a 1mm thick plate that works with solid color PETG, thanks to AH - Prusa i3 MK3S+ Kit@AHPrusai3MK3SKit trying it!
(For the purple I had to take the picture up close and out of focus because the camera didn't want to show this electric arc kind of ultraviloet colour of this Zi-Rui PETG Filament that they describe on Amazon as ‘Sparkly Glitter Purple, Shining Glow in The Dark Green’)