Replacement Cyclone Lever for Dyson DC44 Animal Vacuum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just pop out the old lever, and install this new one. For best results, wait until the original one breaks.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 842
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Just pop out the old lever, and install this new one.
For best results, wait until the original one breaks.
Print instructions
Print with supports, because of the little axel bit that overhangs.
I printed this with PETG because I hear it's a little easier to deform, which you'll need to do to install it.
I think the trick to installing it is to get the spring in place, get one nub seated, but try to wedge it in at an angle, then rotate it clockwise/counterclockwise/anticlockwise to get the other nub to fit in. It's hard to do without snapping the nub, but once it's in place, it's solid.
I don't even know why I'm adding any detail to these instructions. No one's going to need this thing. It was a fluke that the original lever broke in the first place.