Gridfinity Caliper Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gridfinity bin to store your calipers in a drawer.
- Ocena
- 5 / 5
- Polubienia
- 184
- Pobrania
- 1108
- Wydruki
- 11
- Wyświetlenia
- 5203
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 6x1 gridfinity bin for storing digital calipers. Inspired by other designs but reimplemented from scratch to have more accurate measurements (for my model at least). This bin should hold the calipers flatter, and it lowers the cavities as far as possible to minimize the total height so the drawer won't be impeded (works fine in my IKEA Alex drawer). I also added a couple of slots for spare batteries and several angled storage slots which can be used for whatever small knick-knacks you might have; the slots also save some plastic and time on what is otherwise a large print.