Knipex pliers wrench jaw protectors (250mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jaw protectors for Knipex wrench pliers 250mm
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 427
- Wydruki
- 3
- Wyświetlenia
- 1825
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Slide-on jaw protectors for the excellent Knipex 250mm wrench pliers.
According to Sergey, also works on 180mm pliers when scaled at 86%.
Although there are already some 3D-print models around, this was mainly a small project for myself: to learn how to make a CAD-model from a photo.
I tried to design the protectors so they're securely held in place, but also easy to slide on and off.
Printing:
The protectors can print without support, but I'd recommend a small brim.
Nozzle 0.4, extrusion width 0.65.
Filament: I printed in PETG.
I also printed in Flex TPU 85a, but that was a bit too soft: couldn't get a good grip on objects.
Modeling:
I imported a photo of the pliers into Fusion 360, calibrated to the actual dimensions and modeled the pliers from that.
With the ‘shell’ command the bodies for the protectors were made. Afterwards I cut the openings with the extrude command.
