1 / 5
The Lil' Hopper! (Potential Energy Jumping Toy.)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A toy rocket that is driven by built up potential energy in the legs! See how high you can fly!
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 1258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (33)Powiązane
This is a simple to print, simple to build toy “Hopper”. Once assembled you pull the string to build up potential energy then let go to see it fly!
Build Instructions:
- Print 3 Legs, 2 TopBottom, and 1 cap.
- I would suggest PETG to start as PLA could shatter.
- Use .15 layer height and 100% infill.
- Mount the “TopBottom” to the arms with cut filament. You will push the filament through the holes.
- Use a warmed screwdriver to smoosh the extra filament caps into rivets.
- Lace a string of your choice through the hole in the cap (you dont have to tie it).
- Feed the string through the top hole and then the bottom hole.
- Push the cap tight, the friction of the cap and string should make it a snug fit. If its loose, please use a little drop of glue to secure the cap.
- You're done!
Use Instructions:
- Find a wide open empty space.
- I HIGHLY suggest wearing eye protection. For children, always have them angle it away from eyes.
- Pull the string down to make the legs flex into an outward facing C.
- Once there is a lot of tension on the line and the Hopper is primed….
- Let go of the string!
- Watch it fly!
I hope people can do remixes of the “Cap”. I think it could be awesom with different shapes, weight, and whistles.
Enjoy!