Floating Paint brush holder/stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glue and supports are not needed. It will hold up to 18 paintbrushes. It can be rearranged in different ways.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
-All parts are press-fitted, but depending on your printer, it will need some cleanup on the edges to fit.
-It will fit 18 paint brushes and 2-4 (depending on arrangements) smaller holes for items like tweezers.
-They will fit side by side nicely if you print more than one.
-See photos for different arrangements. Feel free to make new arrangements.
Dimensions:
-Hex hole size: 1cm
-Supports height: 10cm
-Hex hole holder: 6.5cm x 4.2cm x 0.5cm
Printing setting recommendation:
-0.2mm layer height
-10% to 0% infill density
Notes for Print files:
Brush holder all parts: this has all the parts needed in one file
Brush holder bottom plate: this file is only needed if you want to change the height of the bottom part walls without adding unnecessary height.