Sunlu S1 filament roller and binding fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Sunlu S1 dryer has problems when filament is low due to the spool racking in the dryer. This model fixes that.
- Ocena
- 4,929 / 5
- Polubienia
- 109
- Pobrania
- 542
- Wydruki
- 18
- Wyświetlenia
- 3614
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The Sunlu S1 filament dryer works nice and the price is right, but I have repeatedly run into an issue when the filament spool runs low. The spool will “rack” in the enclosure, twisting to one side, and then get wedged into position preventing filament from feeding.
This model aims to prevent that. Print two copies of the provided STL, then pull the two bearings out from the bottom of the S1 dryer. We'll only need one of those, so set the other aside and then install the printed parts vertically where the bearings used to sit (see photo).
The bearing should set easily into position and can support your filament spool all the way until it's empty without problems. To swap spools, simply pull the spool out and the bearing should easily lift out with it. Likewise, the model is designed to self-align the bearing when placing the spool back.