Raspberry PI Zero W - Main Board External mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Because I did not have long enough pins to attach a RPI ZeroW to the back of the motherboard I mixed two designs…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 809
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Because I did not have long enough pins to attach a RPI ZeroW to the back of the motherboard I mixed two designs together to create an external mount.
This remix of two existing designs will allow you to connect the board using 6 regular breadboard wires or any other method that you prefer and still keep the PI attached to the back of the mainboard case.
Print instructions
Best results using PET(G) or any other material that resists better to temperature than PLA. RPI Zero W or the PSU can heat up and deform the model over time if printed with PLA.
Supports are needed.