Vegvísir Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An old norse compass stave, as a coaster.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 463
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a coaster with the old norse stave, the Vegvísir, inscribed onto it.
It comes in two parts, for multi-material printing. Or, if you prefer, you can print just the stave itself, and insert a disc of leather or similar, as shown in the main image. The disc is 10 centimeters, give-or-take a millimeter.
It was originally designed for use with leather coasters, to protect them but also to add a little flavour to the plain coasters.
Print upside-down!
TIP: If printing the Vegvísir alone, you can sink the model below the build-plate so you don't print the lip on the bottom, which was meant for holding the leather disc.