1 / 10
Ozito PXC 20V 72W Soldering Iron Station — zdjęcie 1
1 / 10

Ozito PXC 20V 72W Soldering Iron Station

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ozito PXC 20V 72W Soldering Iron Station

Ocena
0 / 5
Polubienia
15
Pobrania
76
Wydruki
1
Wyświetlenia
1601
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A soldering iron station which plugs into an Ozito PXC 18V battery. This soldering iron is amazing! Heats up super quickly and maintains temperature well. The tips are interchangeable too.

Parts required:

* HAKKO T12 Handle DIY kit (eg. https://www.aliexpress.com/item/32740527077.html)
* 16mm Metal Push Button LED Switch (eg. https://www.aliexpress.com/item/1005003120415869.html)
* XL6019 DC Boost transformer (eg. https://www.aliexpress.com/item/32788804655.html)
* NARVA 6.3mm blade terminals from Bunnings (https://www.bunnings.com.au/narva-3mm-blue-electrical-terminal-male-blade-connector-14-pack_p4330755)
* M3 x 10mm nuts and bolts from Bunnings (https://www.bunnings.com.au/pinnacle-m3-x-10mm-zinc-plated-round-head-bolts-and-nuts-20-pack_p0247262)

Instructions:

1. Print all the parts. You need support as shown in the attached image. (Sponge box and iron holder optional)
2. Using a heat gun or some other heat source, heat up the blade terminals and remove the plastic insulation using pliers.
3. Press the terminal connection end flat using some pliers.
4. Solder some wire to the end of the terminals
5. Pull the wires through the holes in the base then press the terminals into their respective positive and negative slots. Once the terminals are aligned properly, superglue the terminals into place.
6. Press the nuts into their recesses in the base and use some superglue to fix them in there.
7. Calibrate boost transformer to output 24V
8. Follow instructions for the switch (normally open)
9. Wire up the soldering kit per the instructions.