Vent Cover for 8" x 12" opening
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flower of life patterned vent cover for a vent with opening of 8" x 12".
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Flower of life sacred geometry pattern vent cover.
I needed a vent cover for a 12" x 8" opening. I am redoing a wall, and the old vent was ugly, oversized and just screwed into the old drywall. This vent cover screws into the outer flap of the aluminum vent and is sized so it just covers the outside of the vent.
Full detentions including outer rim is 250mm x 353.5mm or 9.84" x 13.9"
The vent prints in 2 parts and can be connected by the printed clips in the middle. The clips can be used on their own, or just as a guide to glue the 2 halves together. There are 10 spaces for the clips, and they are a pretty tight fit to hold together.
As for the images, the wall I need this for is not done yet, but the new vent cover is!