Custom integrated 10mm spacer for Supersix Evo Gen3 and Bontrager RSL bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 10mm spacer designed to integrate the cannonade Supersix Evo Gen3 frame with the Bontrager RSL bar.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 1198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed around using an internal structural carbon spacer, this is simply an aesthetic shroud to visually integrate the bar and frame. Intended to use a carbon spacer with an outer diameter of 31.2mm. This outer shroud is intended to be free floating and to rotate with the bars. The cutout in the front is to enable internal routing of the hydraulic and mechanical cables.
I printed this is carbon filled PETG, but really any filament could be used as it is purely aesthetic. I would recommend a material with decent temperature resistance though.