Learning Clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a basic clock face to help my kids learn to tell time. Only 4 parts and no supports needed.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 232
- Wydruki
- 0
- Wyświetlenia
- 864
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Math
- Licencja
- Creative Commons — Attribution — Share Alike
I made this simple model clock for my kids to practice with. It doesn't require any supports to print and only has 4 parts. I colored mine using Bambu studio but the numbers are recessed so you can just switch colors at the correct height if you have a single color printer.
I used 0.2mm print height and 10% infill with PLA I bought from Hatchbox and Bambu Labs. Overall print took me ~2.5 hours using normal speed with my Bambu X1C. I would recommend printing the arms and cap separately to avoid unnecessary filament waste during changes.