Elmer Fudd - Onepiece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elmer J. Fudd, a fictional cartoon character in the Warner Bros. Looney Tunes/Merrie Melodies series.
- Ocena
- 0 / 5
- Polubienia
- 85
- Pobrania
- 466
- Wydruki
- 0
- Wyświetlenia
- 1358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Elmer J. Fudd, a fictional cartoon character in the Warner Bros. Looney Tunes/Merrie Melodies series.
This is a onepiece version of Elmer based on my multi-part Elmer model that I've previously posted.
Since I do not have an SLA printer, I teamed up with maker Kyler Stern to do the printing and painting.
I converted my multi-part model to a onepiece model for SLA and FDM printing. Kyler then proceeded as follows:
Decreased scale to approximately 35% of the original scale.
X-Axis = 1.47 Inch, Y-Axis = 1.75 Inch, Z-Axis = 3 Inch
Printer: Anycubic Photon M3
Resin: Anycubic Water-Washable Grey
Exposure time: 2.5 seconds
Print time: 5-hours
Lychee Estimate print time: 2-Hours 4-Minutes
Note: Something important to call out regarding print time. Kyler has his screen power set to 80% power. This increases print time significantly but extends screen life. This might be important for individuals going forward.
Other notes regarding the supplied STL file:
For FDM and SLA printing, size the STL file as needed for your purpose and add Slicer supports.
Enjoy!