Brompton pedal extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CAUTION: Use at your own risk!
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 1163
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
CAUTION: Use at your own risk! I printed mine in Markforged Onyx filled with fiberglass so it's plenty strong, I don't know how normal 3D printed plastics will hold up.
I created this pedal extension for the folding and non folding pedal because the pedals were way too small for my large feet and I couldn't find any good larger folding pedals for the Brompton.
You will need:
4x M4x20 + washer -> for the folding pedal
4x M4x20 or similar + washer -> for the non folding pedal
Keep in mind with this design the reflectors will be blocked. I could make a design with the reflectors but I don't see really a use for those tiny reflectors on the pedals personally.
Print instructions
Print with supports in the standard orientation for maximum strength. PLA is not recommended!